My Cool Blogs

Archive for the ‘Electronics’ Category

First. Introduction

Full color LED display is a new type of electronic media, in Large size, high brightness, environmental adaptability has irreplaceable advantages for Hu make up aHuge size,Huge size outdoor graphics, video display, the main used in advertising media, stage set, building decoration, traffic information, sports venues and so on. With the LED chip technology, packaging technology and the rapid LED display manufacturing technology to enhance and further price drop, full-color LED display is cost-effective application across the threshold, was a Massivemarket applications and demand. Such as lp156wh1-tla1 and lp156wh2-tlq2

Second, full-color LED display-specific options

Full color LED display is the most critical parts of LED devices. There are three reasons: first, LED full color screen machine in use is the largest number of key components, will use several thousand per square meter to tens of thousands only LED; second, LED display for determining the optical properties of the entire screen of the main direct impact on audience on the screen evaluation; third, LED in the display the largest proportion of overall costs, from 30% to 70%.

LED full color LED display such as lp173wd1-tla1 is the most critical components, the equivalent of a computerCPU. LED options have been decided more than 50% of the entire display quality. If you can notselect a good LED, display the other parts of the screen no matter how good the quality can not make up for deficiencies.

Special LED full color LED display quality and parameters can be reduced to the following five elements:

1, failure rate

As the full color display by a group of thousands or even hundreds of thousands of red, green, and blue LED pixels comprising the composition of the failure of any color LED display will affect the overall visual effect. In general, according to industry experience, beginning in the LED display assembly to the aging of 72 hours before shipping the failure rate should be no more than three ten thousandths (LED device itself that caused the failure).

2, anti-static capability

LED is a semiconductor device sensitive to static electricity, static electricity can easily lead to failure, it is anti-static capability is essential to the life of the display. In general, LED human static test failure mode voltage should not be less than 2000V.

3, attenuation characteristics

Red, green, blue LED are the working hours have increased as the intensity attenuation characteristics. Advantages and disadvantages of LED chips, auxiliary materials and packaging technology good or bad The level of the decay rate determines the LED. In general, the 1000 hours, 20 mA at room temperature after the test light, the red LED should be less than 10% attenuation, blue, green LED of the attenuation should be less than 15%. Red, green, blue attenuation consistency of the full-color LED display such as lp171wu1 great influence on the future of the white balance, thereby affecting the fidelity of the display screen.

4, brightness

LED brightness is an important determinant of the display brightness. The higher the LED brightness, the greater use of current margin of saving power, to maintain good stability LED. LED have different angles, the brightness has been set in the chip case, the smaller the angle, LED, the more light, but the perspective of the smaller screen. General should be chosen to ensure 100-degree LED display adequate perspective. Different for different point spacing and line of sight of the display, should be light, angle and prices to find a balance.

5, consistency

Full color display is a myriad of red, green and blue LED pixels makes up the composition, and the brightness of each color LED, the wavelength determines the consistency of the brightness of the display consistency, consistency of white balance, color consistency sex. In general, the display device manufacturers asked suppliers to provide 5nm wavelength range and 1:1.3 in the brightness range of LED, these indicators can be adopted by device vendors spectrophotocolorimeter grading machine to achieve. Voltage makes the consistency of the general requirements.

As the LED is angled, so full color LED display such as b170pw07 also has a point of direction, that is, when viewed at different angles, its brightness will be increasing or decreasing. In this way, red, green and blue LED’s perspective will seriously affect the consistency of the consistency of different angles, white balance, directly affecting the fidelity of the color video display. To achieve red, green, and blue LED brightness variations at different angles, matching consistency, the lens in the package design, raw materials, rigorous scientific design choice, depending on the technical level of packaging suppliers. Even the best method to display the direction of white balance, if the angle LED consistency is not good, the whole screen effect of different angles of the white balance will be bad. The angle of the device features LED consistency point of view can be integrated LED tester measured, for middle and high display is particularly important.

Third, full-color LED display specific use:

High-quality LED also needs a good use and the environment, can be summed up using the following eight points:

1, anti-static

Display such as lp171wu1 assembly plant should have good anti-static measures. Special anti-static, anti-static flooring, anti-static soldering iron, anti-static table mat, anti-static ring, anti-static clothing, humidity control, equipment grounding (especially cutting machines) are all basic requirements, and regular tests to use static meter .

2, through wave soldering temperature and time

To be strict control of temperature and wave front through furnace welding time,recommendations are: preheat temperature 100 ? ± 5 ?, the maximum does not exceed 120 ?, and the preheating temperature rise for a smooth, welding temperature of 245 ? ± 5 ?, welding time recommended no more than 3 seconds after furnace avoid excessive vibration or shock LED, until the restoration of normal temperature. Wave soldering machine to periodically test the temperature parameter, which is determined by the characteristics of LED, overheating, or fluctuations in temperature will cause direct damage to LED or LED quality risks, especially for small size, such as circular and oval 3mm LED.

3, the design current value

The nominal LED current is 20mA, maximum use of current general suggestion of not more than 80% of nominal value, in particular, the distance between the small screen, due to poor heat dissipation, but also reduce the current value.

Experience, as red, green, blue LED decay rate of the inconsistency, targeted reduction in blue, green LED’s current value, in order to maintain display consistency of the white balance after prolonged use.

4,blended with light

The same color with different brightness profile of LED lights require mixing, or the law designed to plug in discrete light diagram inserted lamp, in order to ensure the full screen brightness of each color consistency. This process if a problem occurs, there will be displays of local brightness inconsistency, directly affect the LED screen display.

5, control the light and the vertical degree

For the-line LED for a sufficient time had furnace technology to ensure perpendicular to the PCB board LED. Any deviation will affect the already set a good LED brightness uniformity, color block appears inconsistent brightness.

6, thermal design

LED work may have a fever, high temperature will affect the decay rate and the stability of the LED, so the heat PCB board design, thermal design of the ventilation box will affect LED performance.

7, Weld Control

LED display LED isn’t lit in the event, they often have more than 50% probability caused by various types of Weld, such as the LED pin Weld, IC pin Weld, and Weld pin arrangement such as the mother. These issues need to strictly improve the process to improve and strengthen the quality inspection to resolve. Vibration test before leaving the factory also be a good test method.

8, driving circuit design

Display module on the drive circuit board arrangement of driver IC for LED brightness will also be affected. As the driver IC output current in the PCB board transmission distance too far, will make the transmission path of the pressure drop is too large, affecting the normal LED operating voltage leads to decrease in brightness. We often find that the LED display modules around the middle of the brightness lower than that for this reason. Therefore, the display brightness to ensure consistency, we must design a good drive circuit distribution.

These are the selection and use from the perspective introduced full-color LED display relevant knowledge, dedicated, full-color LED display is a system integration of products, need for LED packaging manufacturers and display applications in close collaboration with manufacturers to strengthen technological exchanges. China has now become the world’s manufacturing center LED display is closer to the LED display manufacturing power. So far, China Full Color LED package uses standard has been greatly improved, many indicators have been close to the level of Japanese firms, individual targets have been exceeded, this will greatly promote the development of China’s LED display.

EncryptStick

I found EncryptStick very easy to use and encorporate into my daily ritual. Do you need EncryptStick on everypersonal you own? No. I think it would be to anyones advantage to use EncryptStick on any laptop that you use if you’re a moble user or if you just frequent starbucks or any other public access locations. Not to say you’ve no reason to use it on a home computer, you may have files you don’t want your kids to have any access to. I would suggestit to anyone on their workpersonal if they have any administrator rights and the need to keep confidential information secure.
Get 20% Off Encrypt-Stick 4.1. Coupon code: AMW200920
Get 20% Off Encrypt-Stick Preloaded 4GB Flash Drive. Coupon code: AMW200920
//

Why EncryptStick™

• Prevents thieves/hackers from gaining access to private files.
• Log-in password is encrypted using 512 Polymorphic Encryption.
• Defeats key loggers.
• Secures data from unwanted viewing.
• Protects information on lost flash drives.
• Viruses can’t infest encrypted files.
• Eliminates the threat of Identity Theft.
• Defeats phishers in their tracks.
• Inexpensive Piece of Mind.
• Compliancy with the PIPEDA Act.
• Reduces IT costs.

Lost Flash Drive

EncryptStick™ software allows your customers to easily initialize a replacement Flash Drive by using our Instant
Recovery System. They simply obtain another flash drive with a serial number and go through the private
registration process on our web site. Once completed they’ll have a new Key and will be able to access any encrypted files on their computer. Unlike other systems, we never know their password and thus[ cannot help recover files unless password information is properly registered and recorded].

Features and Benefits

• Works with Windows 2000/XP/Vista/7.
• Works on any serial numbered flash drive.
• Simple installation takes less than 5 minutes.
• 512 bit Polymorphic Encryption.
• Can create unlimited Invisible encrypted vaults folders on any PC.
• Create invisible encrypted vaults folders on CD’s, DVD’s and external hard drives.
• Shred/Military wipe of deleted files.
• Application runs on a flash drive not a PC.
• Application leaves no footprint on host PC.
• Free Lifetime updates.
• Encryption and Decryption speed of 500Mbs.
• Encrypted files cannot be infected with Viruses.
• Ability to use multiple USB flash drives on the same computer.
• Locked files are safe from prying eyes if device is lost or stolen.
• No minimumstipulations for CPU or memory.
• Application is less than 4 MB.
• No installation of software or drivers on host computeris required.
• No set storage limit to invisible encrypted vaults folders.
• Compression of files, thus increasing flash drive storage.
• Password is not shared with an administrator.
• Able to edit any documents on the fly without decrypting.
• Simple user friendly interface.
• Live search feature.
• On-line support system.
• Multiple window view modes, list, icon and columns.
• Instant lock button.
• Change password at any time.
• Timeout feature, grants user to set a defined time to lock their flash drive.

How EncryptStick™ Works

Insert flash drive
Insert EncryptStick™ enabled flash drive.

Login and manage files
Enter password. Once logged in you can manage files, create vaults, encrypt & decrypt files etc.

Remove flash drive
Once flash drive has been removed, all of the vaults are locked & encrypted. No one will ever have
access to the files.

Why EncryptStick™

• Prevents thieves/hackers from gaining access to private files.
• Log-in password is encrypted using 512 Polymorphic Encryption.
• Defeats key loggers.
• Secures data from unwanted viewing.
• Protects information on lost flash drives.
• Viruses can’t infest encrypted files.
• Eliminates the threat of Identity Theft.
• Defeats phishers in their tracks.
• Inexpensive Piece of Mind.
• Compliancy with the PIPEDA Act.
• Reduces IT costs.

Lost Flash Drive

EncryptStick™ software grants your customers to easily initialize a replacement Flash Drive by using our Instant
Recovery System. They simply obtain another flash drive with a serial number and go through the private
registration process on our web site. Once completed they will have a new Key and will be able to access any encrypted files on their computer. can’t help recover files unless password information is properly registered and recorded].

Features and Benefits

• Works with Windows 2000/XP/Vista.
• Works on any serial numbered flash drive.
• Simple installation takes less than 5 minutes.
• 512 bit Polymorphic Encryption.
• Can create unlimited Invisible encrypted vaults folders on any PC.
• Create invisible encrypted vaults folders on CD’s, DVD’s and external hard drives.
• Shred/Military wipe of deleted files.
• Application runs on a flash drive not a PC.
• Application leaves no footprint on host PC.
• Free Lifetime updates.
• Encryption and Decryption speed of 500Mbs.
• Encrypted files cannot be infected with Viruses.
• Ability to use multiple USB flash drives on the same computer.
• Locked files are safe from prying eyes if device is lost or stolen.
• No minimum requirementsfor CPU or memory.
• Application is less than 4 MB.
• No installation of software or drivers on host computeris required.
• No set storage limit to invisible encrypted vaults folders.
• Compression of files, thus increasing flash drive storage.
• Password is not shared with an administrator.
• Able to edit any documents on the fly without decrypting.
• Simple user friendly interface.
• Live search feature.
• On-line support system.
• Multiple window view modes, list, icon and columns.
• Instant lock button.
• Change password at any time.
• Timeout feature, allows user to set a defined time to lock their flash drive.

How EncryptStick™ Works

Insert flash drive
Insert EncryptStick™ enabled flash drive.

Login and manage files
Enter password. Once logged in you can manage files, create vaults, encrypt & decrypt files etc.Remove flash drive
Once flash drive has been removed, all of the vaults are locked & encrypted. No one will ever have
access to the files.